Details|
How to make casters have a longer service life
Views：787 Updated：2021-12-04
How to make the casters have a longer service life is a problem that many users care about. The following Hanke casters will focus on everyone:
First, confirm the selection of casters with the caster supplier. The weight of the caster is involved, and the material needs to be selected reasonably according to the actual application environment. There are some factors to pay attention to after product selection, as follows:
1. The casters are correctly and reliably installed at the designed position.
2. The caster bracket installed must have sufficient strength and the material must be reliable.
3. The function of the caster cannot be changed, nor is it affected by the installation device.
4. The rotating shaft must always be vertical.
5. The fixed casters must be in a straight line with their axles.
6. If only swivel casters are used, they must be consistent.
7. If fixed casters are used in conjunction with rotating casters, all casters must be compatible with each other and must be recommended by the manufacturer. If casters are used in the following areas: outdoor, coastal areas, areas with strong corrosiveness and/or harsh conditions of use, special products must be specified. When the temperature is lower than 5℃ and higher than 30℃, the efficiency of the caster will decrease, especially when the temperature is lower or higher than the above data, the listed normal load capacity may be affected. Specific products will be explained in detail. The complete caster is assembled from component parts. The manufacturer is only responsible for the complete casters made from the original parts.
Routine maintenance of casters: oiling and lubrication of axles and rotating bearings; after installation, tightening of axles and/or adjustable center pins. Any cleaning agent used must not contain corrosive and abrasive ingredients.
Home
KTC
Products
News
Exhibition
Service
Company
Contact